Optimised light weight cap design with an inner membrane.

Key features

  • Snap on system
  • Tamper evident inner membrane
  • Two piece closure
  • High performance seal interface / low MVTR− excellent container and closure fit
  • FDA registered, DMF type III, DMF no. 18790
  • Material HDPE and LDPE
  • Injection moulded
  • Standard colors available
  • Available in two sizes
  • Available in Pharma grade materials
  • Available in biomaterial

 

TypeClosure Components
Necktype
42

Dimensions

Width49.9 mm
Height10 mm

Overview

Article Number
C112430-M
Nolato Product Area
  • Pharmaceutical use
    • VMS
      • Suitable for food contact
        Nolato Product Type
        • Caps

          Characteristics

          MaterialsPlastic - HDPE, PEHD. Plastic - LDPE, PELD. Plastic - Biobased
          Standard Colors AvailableCustom Color


          Flexible product range in many sizes, colors and cap designs with low MVTR.

          • Suitable for solid dose
          • Complete pack solution
          • Snap on neck design
          • 6 different cap designs
          • 2 different neck sizes = 2 cap sizes fit the entire range
          • Standard colors available
          • FDA registered, DMF type III, DMF no. 18790
          • Injection blow moulded
          • Material HDPE
          • Available in Pharma grade materials
          • Fulfills USP 671 (UV and WVP)
          • Child Resistant, desiccant and easy to open options available
          • Available in biomaterial
          • Available in frosted materials

           

          TypeBottles
          Necktype
          42

          Volume

          Volume - Nominal110 ml

          Dimensions

          Height75.2 mm
          Body Diameter51.7 mm
          Label Height (Indication)50 mm

          Neck

          Neck TypesSnap On
          Neck Diameter Inner34.9 mm
          Neck Diameter Outer41 mm

          Overview

          Article Number
          C112865
          Nolato Product Area
          • Pharmaceutical use
            • VMS
              • Suitable for food contact
                Nolato Product Type
                • Solids
                  • Bottles

                    Characteristics

                    MaterialsPlastic - HDPE, PEHD. Plastic - Biobased
                    Standard Colors AvailableCustom Color
                    Color Note
                    Any color, except dark blue
                    Easy to OpenYes

                    Feature Options

                    DesiccantYes
                    Child ResistantYes


                    Child resistant cap with tamper evident inner membrane

                    Key features

                    • Snap on system
                    • Tamper evident inner membrane
                    • Two piece closure
                    • Meets ISO standard 8317:2015 for child resistance
                    • Complies with WVP test USP 671
                    • FDA registered, DMF type III, DMF no. 18790
                    • Material HDPE and LDPE
                    • Injection moulded
                    • Available in two sizes
                    • Available in Pharma grade materials

                     

                    TypeClosure Components
                    Necktype
                    42

                    Dimensions

                    Width51.3 mm
                    Height12.1 mm

                    Overview

                    Article Number
                    C113230
                    Nolato Product Area
                    • Pharmaceutical use
                      • VMS
                        • Suitable for food contact
                          Nolato Product Type
                          • Caps

                            Characteristics

                            MaterialsPlastic - HDPE, PEHD. Plastic - LDPE, PELD
                            Standard Colors AvailableCustom Color
                            Child ResistantYes


                            Flexible product range in many sizes, colors and cap designs with low MVTR.

                            • Suitable for solid dose
                            • Complete pack solution
                            • Snap on neck design
                            • 6 different cap designs
                            • 2 different neck sizes = 2 cap sizes fit the entire range
                            • Standard colors available
                            • FDA registered, DMF type III, DMF no. 18790
                            • Injection blow moulded
                            • Material HDPE
                            • Available in Pharma grade materials
                            • Fulfills USP 671 (UV and WVP)
                            • Child Resistant, desiccant and easy to open options available
                            • Available in biomaterial
                            • Available in frosted materials

                             

                            TypeBottles
                            Necktype
                            42

                            Flexible product range in many sizes, colors and cap designs with low MVTR.

                            • Suitable for solid dose
                            • Complete pack solution
                            • Snap on neck design
                            • 6 different cap designs
                            • 2 different neck sizes = 2 cap sizes fit the entire range
                            • Standard colors available
                            • FDA registered, DMF type III, DMF no. 18790
                            • Injection blow moulded
                            • Material HDPE
                            • Available in Pharma grade materials
                            • Fulfills USP 671 (UV and WVP)
                            • Child Resistant, desiccant and easy to open options available
                            • Available in biomaterial

                             

                            TypeBottles
                            Necktype
                            42

                            Flexible product range in many sizes, colors and cap designs with low MVTR.

                            • Suitable for solid dose
                            • Complete pack solution
                            • Snap on neck design
                            • 6 different cap designs
                            • 2 different neck sizes = 2 cap sizes fit the entire range
                            • Standard colors available
                            • FDA registered, DMF type III, DMF no. 18790
                            • Injection blow moulded
                            • Material HDPE
                            • Available in Pharma grade materials
                            • Fulfills USP 671 (UV and WVP)
                            • Available in biomaterial

                             

                            TypeBottles
                            Necktype
                            42

                            Flexible product range in many sizes, colors and cap designs with low MVTR.

                            • Suitable for solid dose
                            • Complete pack solution
                            • Snap on neck design
                            • 6 different cap designs
                            • 2 different neck sizes = 2 cap sizes fit the entire range
                            • Standard colors available
                            • FDA registered, DMF type III, DMF no. 18790
                            • Injection blow moulded
                            • Material HDPE
                            • Available in Pharma grade materials
                            • Fulfills USP 671 (UV and WVP)
                            • Child Resistant, desiccant and easy to open options available
                            • Available in biomaterial

                             

                            TypeBottles
                            Necktype
                            42

                            Flexible product range in many sizes, colors and cap designs with low MVTR.

                            • Suitable for solid dose
                            • Complete pack solution
                            • Snap on neck design
                            • 6 different cap designs
                            • 2 different neck sizes = 2 cap sizes fit the entire range
                            • Standard colors available
                            • FDA registered, DMF type III, DMF no. 18790
                            • Injection blow moulded
                            • Material HDPE
                            • Available in Pharma grade materials
                            • Fulfills USP 671 (UV and WVP)
                            • Child Resistant, desiccant and easy to open options available

                             

                            TypeBottles
                            Necktype
                            42

                            Flexible product range in many sizes, colors and cap designs with low MVTR.

                            • Suitable for solid dose
                            • Complete pack solution
                            • Snap on neck design
                            • 6 different cap designs
                            • 2 different neck sizes = 2 cap sizes fit the entire range
                            • Standard colors available
                            • FDA registered, DMF type III, DMF no. 18790
                            • Injection blow moulded
                            • Material HDPE
                            • Available in Pharma grade materials
                            • Fulfills USP 671 (UV and WVP)
                            • Child Resistant, desiccant and easy to open options available

                             

                            TypeBottles
                            Necktype
                            42

                            Cap with tamper evident ring – desiccant and easy to open options.

                            Key features

                            • Snap on system
                            • Tamper evident ring
                            • Two piece closure
                            • High performance seal interface / low MVTR − excellent container and closure fit
                            • Options with desiccant canisters
                            • Options with easy to open adaptors
                            • FDA registered, DMF type III, DMF no. 18790
                            • Material HDPE and LDPE
                            • Injection moulded
                            • Available in two sizes
                            • Available in Pharma grade materials
                            • Available in biomaterial

                             

                            TypeClosure Components
                            Necktype
                            42

                            Dimensions

                            Width51.2 mm
                            Height18.7 mm

                            Overview

                            Article Number
                            C112730
                            Nolato Product Area
                            • Pharmaceutical use
                              • VMS
                                • Suitable for food contact
                                  Nolato Product Type
                                  • Caps

                                    Characteristics

                                    MaterialsPlastic - HDPE, PEHD. Plastic - LDPE, PELD. Plastic - Biobased

                                    Feature Options

                                    DesiccantYes
                                    Easy to OpenYes


                                    Cerbo Classic caps and containers can be customised regarding color – making your packaging a perfect communicator of your brand identity. Contact us for more information on how we can help you make a statement with your packaging.

                                    • Suitable for solid dose
                                    • Complete pack solution
                                    • Snap on neck design
                                    • 5 different cap designs
                                    • 2 different neck sizes = 2 cap sizes fi t the entire range
                                    • Standard colors available
                                    • Injection blow moulded
                                    • Material PP
                                    • Fulfills Tightness requirement according to USP 671 (WVP).
                                    • UV-transmission depend on color MB.
                                    • Available in Pharma grade materials
                                    • Available in biomaterial

                                     

                                    TypeBottles
                                    Necktype
                                    42

                                    Cerbo Classic caps and containers can be customised regarding color – making your packaging a perfect communicator of your brand identity. Contact us for more information on how we can help you make a statement with your packaging.

                                    • Suitable for solid dose
                                    • Complete pack solution
                                    • Snap on neck design
                                    • 5 different cap designs
                                    • 2 different neck sizes = 2 cap sizes fi t the entire range
                                    • Standard colors available
                                    • Injection blow moulded
                                    • Material PP
                                    • Fulfills Tightness requirement according to USP 671 (WVP)
                                    • UV-transmission depend on color MB
                                    • Available in Pharma grade materials
                                    • Available in biomaterial

                                     

                                    TypeBottles
                                    Necktype
                                    42

                                    Easy to open adaptor, to be assembled with SC-Light 42 cap.

                                    Key features

                                    • Snap on system
                                    • Tamper evident inner membrane
                                    • Two piece closure assembly
                                    • Easy to open
                                    • FDA registered, DMF type III, DMF no. 18790
                                    • Material HDPE
                                    • Injection moulded
                                    • Available in Pharma grade materials
                                    • Standard colors available

                                     

                                    TypeClosure Components
                                    Necktype
                                    42

                                    Dimensions

                                    Width53 mm
                                    Height9 mm

                                    Overview

                                    Article Number
                                    C111880
                                    Nolato Product Area
                                    • Pharmaceutical use
                                      • VMS
                                        • Suitable for food contact
                                          Nolato Product Type
                                          • Caps

                                            Characteristics

                                            MaterialsPlastic - HDPE, PEHD
                                            Standard Colors AvailableCustom Color
                                            Easy to OpenYes


                                            Easy to open adaptor, to be assembled with CL-42 cap.

                                            Key features

                                            • Snap on system
                                            • Tamper evident ring
                                            • Two piece closure assembly
                                            • Easy to open
                                            • FDA registered, DMF type III, DMF no. 18790
                                            • Material HDPE
                                            • Injection moulded
                                            • Available in two sizes
                                            • Available in Pharma grade materials
                                            • Standard colors available

                                             

                                            TypeClosure Components
                                            Necktype
                                            42

                                            Dimensions

                                            Width53.5 mm
                                            Height24 mm

                                            Overview

                                            Article Number
                                            C112980
                                            Nolato Product Area
                                            • Pharmaceutical use
                                              • VMS
                                                • Suitable for food contact
                                                  Nolato Product Type
                                                  • Caps

                                                    Characteristics

                                                    MaterialsPlastic - HDPE, PEHD
                                                    Easy to OpenYes

                                                    Feature Options

                                                    DesiccantYes


                                                    One piece cap – easy to open.

                                                    Key features

                                                    • Snap on system
                                                    • Tamper evident inner membrane
                                                    • One piece closure
                                                    • The cap is easily opened using the thumb
                                                    • Material PP
                                                    • Injection moulded
                                                    • Standard colors available
                                                    • Available in two sizes
                                                    • Available in Food grade materials

                                                     

                                                    TypeClosure Components
                                                    Necktype
                                                    42

                                                    Dimensions

                                                    Width44.5 mm
                                                    Height15.3 mm

                                                    Overview

                                                    Article Number
                                                    C112960
                                                    Nolato Product Area
                                                    • Pharmaceutical use
                                                      • VMS
                                                        • Suitable for food contact
                                                          Nolato Product Type
                                                          • Caps

                                                            Characteristics

                                                            MaterialsPlastic - PP
                                                            Standard Colors AvailableCustom Color
                                                            Easy to OpenYes

                                                            • Michael Foster
                                                            • Product -> Component
                                                            • English
                                                            • Created 01 Dec 2020
                                                            • Modified 15 Sep 2022
                                                            • Hits 3242